LilyPad


LilyPad LED Blue (5pcs)
This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued deve..
R64.91 (exc VAT)
LilyPad LED Blue (5pcs)
Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Dimensions: 5x11mm Thin 0.8mm PCB Document..
R64.91 (exc VAT)
LilyPad LED Red (5pcs)
Here is a simple 5 pack of red LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Dimensions: 5x11mm Thin 0.8mm PCB Documents..
R64.91 (exc VAT)
LilyPad Arduino Simple Board
This is the LilyPad Arduino Simple Board. It’s controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in power supply socket, and an on/off switch. Any of our LiPo batteries can be plugged right into the socket. The Simple board is designed to streamline your next sewable project by keeping things simple and giving you more room to work  and eliminating the need to sew a power supply. This revision does away with the ISP header and adds a charging circuit based on the MCP73831 IC. LilyPad is a wearable e-textile technology..
R338.16 (exc VAT)
LilyPad Buzzer
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it’s come to our attention that washing these buzzers will damage them. Until we’ve figured out a solution to this, avoid washing any portion of your project that c..
R129.82 (exc VAT)
LilyPad LED Green (5pcs)
This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued..
R64.91 (exc VAT)
LilyPad Coin Cell Battery Holder - 20mm
If you’re looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It’s a simple board which holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project. Note: The LilyPad Coin Cell Battery Holder is a design conceived by Felicia Williams of Boulder, Colorado. Also, a portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Documents: Schematic Eagle Files GitHub (Design File..
R64.91 (exc VAT)
E-textile Basics Lab Pack
This is the E-textile Basics Lab Pack, a basic wearables learning kit that can easily get you and a group of peers or students into the the world of e-textiles without having to deal with any programming or code. With this kit you will be able to learn how to sew in a variety of LEDs and other basic electronics into any fabric, power them, and make them twinkle within a few minutes! SparkFun packages everything educators need to get started with this platform in a number of varieties that fit different classroom settings and populations. The hardware boards, thread, needles, batteries and ext..
R4,161.40 (exc VAT)
Firefly Jar Kit
Are you looking for a fun and simple e-textiles project? The Firefly Jar Kit is a great project for anyone from beginners to experienced e-textile hackers. The Firefly Jar Kit uses our LilyTwinkle board with a handful of sewable LilyPad LEDs, all on a ProtoSnap board, to fill a felt jar with shining, twinkling fireflies (or lightning bugs… whatever you call them) Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features. Kit Includes: L..
R351.32 (exc VAT)
LilyPad Arduino SimpleSnap
The LilyPad SimpleSnap is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it’s also a great way to prototype! The SimpleSnap board is similar to the LilyPad Simple board, and has the same functionality except for two major differences: A built-in rechargeable Lithium Polymer battery and female snap connectors. By adding fabric snaps to the board, LilyPad’s made it possible to connect this board to the SimpleSnap Protoboard or simply an arrangement of sew-on fabric snaps so that the board is removable from your project for wash..
R467.98 (exc VAT)
LilyPad Arduino USB - ATmega32U4 Board
The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest and greatest bootloader, but it also means no more FTDI Basic! The only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB support. The LilyPad USB is also officially supported in the Arduino IDE as of version 1.0.2! Just like the LilyPad Simple, this board operates at 3.3V and features a JST sock..
R389.91 (exc VAT)
LilyPad Coin Cell Battery Holder - Switched - 20mm
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on. Just like t..
R64.91 (exc VAT)
LilyPad Lab Pack
The ProtoSnap LilyPad Development Board is a good way to introduce and explore e-textiles. This LabPack includes everything you need to get students programming and sewing their own LilyPad creations. SparkFun packages everything educators need to get started with this platform in a number of varieties that fit different classroom settings and populations. The hardware boards, cables, and extra parts come pre-packaged. Examples and curriculum material are available from SparkFun and Arduino as well as from other educators involved in this growing educational movement. The LabPacks are Spar..
R15,604.82 (exc VAT)
LilyPad LED Pink (5pcs)
This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued deve..
R64.91 (exc VAT)
LilyPad LED Yellow (5pcs)
This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued de..
R64.91 (exc VAT)
LilyPad LilyMini ProtoSnap
The LilyMini ProtoSnap is a great way to get started learning about creating interactive e-textile circuits before you start sewing. Like other LilyPad ProtoSnap boards, the LilyMini ProtoSnap has all of its pieces wired together out of the box, enabling you to test the circuit’s function before you sew. At the center of the board is a pre-programmed LilyMini microcontroller connected to a LilyPad Light Sensor, LilyPad Button and two pairs of LilyPad LEDs. The LilyMini ProtoSnap ships with pre-loaded code that uses all the LilyPad pieces connected to it. This sample code has three modes, whic..
R221.05 (exc VAT)
LilyPad MP3
The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can put on a micro-SD card. It can be powered by a 3.7V Lipo battery (charging circuit built-in!), or an external 3.5-6V source. Off the shelf, it will play specific audio files when any of its five trigger inputs are grounded, or you can solder in an RGB ..
R780.26 (exc VAT)
LilyPad Pixel Board
We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel board is compatible with a WS2812B which is actually an RGB LED with a WS2811 built right into the LED! Several of these breakouts can be chained together to form a display or an addressable string. LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards ar..
R64.91 (exc VAT)
LilyPad Protoboard Small
This is a small board for prototyping through-hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don’t want connected! Standard 0.1" array. Check rear photo for trace configuration. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and..
R25.88 (exc VAT)
LilyPad Sewable Electronics Kit
The LilyPad Sewable Electronics Kit lets you explore the wonderful world of electronic sewing (e-sewing) and e-textiles through a series of introductory projects using the LilyPad system. You’ll learn how to sew basic circuits to light up LEDs, control them with buttons and switches and even experiment with a pre-programmed LilyMini circuit that reacts to ambient light levels. In addition to LilyPad LEDs and battery holders, the kit comes with two LilyPad ProtoSnap boards that let you explore the circuit before you sew the pieces into a project. The full-color LilyPad Sewable Electronics Kit ..
R2,210.53 (exc VAT)
LilyPad Simple Power
The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in added a bit of power to your next wearable circuit. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, ..
R156.14 (exc VAT)
LilyPad SimpleSnap Protoboard
The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it’s also a great way to prototype! The SimpleSnap Protoboard is made to connect to the SimpleSnap main board so that the board is removable from your project for washing or so that multiple projects can share a board! The ring of male snap connectors on the SimpleSnap Protoboard mate directly to the LilyPad SimpleSnap main board, just sew the Protoboard to your project and the main board can be attached and removed easily from your project wi..
R156.14 (exc VAT)
LilyPad Slide Switch
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a reduction in current. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr..
R39.04 (exc VAT)
LilyPad Tri-Color LED
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel. LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washa..
R117.11 (exc VAT)
LilyPad Vibe Board
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use. LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. Note: A portion of this sale is given back to Dr. Leah Buechley for continued develop..
R168.86 (exc VAT)
LilyPad XBee
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn into your project just attach your favorite XBee to the pre-soldered headers and you are good to go! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothin..
R260.09 (exc VAT)
LilyTiny
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will each blink or fade differently. One will blink on and off (2), another will flash a heartbeat pattern (1), another will do a “breathing” fade (0) and the other will do a random fade (3). LilyTiny is a quick and easy way to add twinkling lights to a project without..
R78.07 (exc VAT)
LilyTwinkle
The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will twinkle-fade (a lot like fireflies… or lightning bugs, if that’s what you call them). LilyTwinkle is a quick and easy way to add twinkling lights to a project without any programming or a bulky Main Board. If you’re an advanced user and want to re-program the LilyTwinkle, the ICSP programming conne..
R78.07 (exc VAT)
LilyTwinkle ProtoSnap
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyTwinkle board is a very simple way to jump right into e-textiles. By including the LilyTwinkle, a coin cell battery holder (with built-in switch), and four white LEDs the ProtoSnap LilyTwinkle board easily allows you to add some sparkle to any project. To make your e-textile experience all the more enjoyable we have a..
R312.28 (exc VAT)
ProtoSnap - LilyPad Development Board
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Development Board is designed to get you started in the world of e-textiles. Combining a LilyPad Simple Board with other LilyPad components like a buzzer, a vibration motor, an RGB LED, a button, a switch, five LEDs, a light sensor, and a temperature sensor, the ProtoSnap LilyPad Development Board lets you dive ri..
R936.40 (exc VAT)
ProtoSnap - LilyPad Development Simple
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Simple Development board is a great way to get started in programmable e-textiles. By combining a LilyPad Simple board with 4 LED boards and a buzzer, the ProtoSnap LilyPad Simple Development board gives you everything you need to learn the basics. The kit also includes our LilyPad FTDI basic for programming the S..
R780.26 (exc VAT)
SparkFun Parts Box - LilyPad (Magnetic)
When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, the tools of the trade. Why not pick up a sturdy little box to keep your bits and pieces off the floor? This LilyPad branded box is made from rigid cardboard printed with a fancy tone-on-tone pattern and LilyPad logo. There are even magnetic closures embedded in the lid. We like this box because it’s rigid enough to throw in a sewing bag and it also looks good on a workbench. With an inside dimension of 9" x 4" and 1.5" deep, it’s big enough for batteries, fabric swatch..
R78.07 (exc VAT)
LilyPad Arduino 328 Main Board
This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through. This version of the LilyPad now uses the new ATmega328 at 8MHz. Arduino 0016 supports the Arduino Pro Mini 328/8MHz. Use this setting when using this..
R312.28 (exc VAT)
LilyPad Arduino USB - ATmega32U4 Board
The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest and greatest bootloader, but it also means no more FTDI Basic! The only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB support. The LilyPad USB is also officially supported in the Arduino IDE as of version 1.0.2! Just like the LilyPad Simple, this board features a JST socket so you can directl..
R389.91 (exc VAT)
LilyPad Coin Cell Battery Holder - Switched - 20mm
Sure, your flashing, chip-tune playing t-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well look no further. This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn off or on. Jus..
R78.07 (exc VAT)
LilyPad LED Green (5pcs)
Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Dimensions: 5x11mm Thin 0.8mm PCB Documents: Schemat..
R64.91 (exc VAT)
LilyPad LED Micro - Blue (5pcs)
Need a smaller way to add some ‘twinkle’ to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the surface mount LED we’ve shrunk the board down which looks great in elegant designs or on sheer fabrics where you don’t need the extra weight or exposed board space. It’s really the closest you can come to sewing a point of light directly to your project. Note: Because the board don’t include a current-limiting resistor, it is possible to over-power them and possib..
R58.33 (exc VAT)
LilyPad LED Micro - Green (5pcs)
Need a smaller way to add some ‘twinkle’ to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the surface mount LED we’ve shrunk the board down which looks great in elegant designs or on sheer fabrics where you don’t need the extra weight or exposed board space. It’s really the closest you can come to sewing a point of light directly to your project. Note: Because the board don’t include a current-limiting resistor, it is possible to over-power them and possib..
R58.33 (exc VAT)
LilyPad LED Micro - Red (5pcs)
Need a smaller way to add some ‘twinkle’ to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the surface mount LED we’ve shrunk the board down which looks great in elegant designs or on sheer fabrics where you don’t need the extra weight or exposed board space. It’s really the closest you can come to sewing a point of light directly to your project. Note: Because the board don’t include a current-limiting resistor, it is possible to over-power them and possib..
R58.33 (exc VAT)
LilyPad LED Micro - White (5pcs)
Need a smaller way to add some ‘twinkle’ to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the surface mount LED we’ve shrunk the board down which looks great in elegant designs or on sheer fabrics where you don’t need the extra weight or exposed board space. It’s really the closest you can come to sewing a point of light directly to your project. Note: Because the board don’t include a current-limiting resistor, it is possible to over-power them and possib..
R58.33 (exc VAT)
LilyPad LED Pink (5pcs)
A simple, very bright pink LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Dimensions: 5x11mm Thin 0.8mm PCB Documents: Schematic Eagle Files Datasheet (LED) Lighting Up a B..
R64.91 (exc VAT)
LilyPad LED Purple (5pcs)
A simple purple LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. Note: The purple LED has a much higher voltage drop than other LilyPad LEDs so it will be dimmer than the others. What’s voltage drop? Click here and get your learn on! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development..
R64.91 (exc VAT)
LilyPad LED White (5pcs)
A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Dimensions: 5x11mm Thin 0.8mm PCB Documents: Schematic LED Datasheet Lighting Up a Basic..
R64.91 (exc VAT)
LilyPad LiPower
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected. This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery ..
R207.89 (exc VAT)
LilyPad Pixel Board
We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel board is equipped with a WS2812 which is actually an RGB LED with a WS2811 built right into the LED! Several of these breakouts can be chained together to form a display or an addressable string. LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are a..
R64.91 (exc VAT)
LilyPad Protoboard Large
This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don’t want connected! Standard 0.1" array. Check rear photo for trace configuration. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and..
R142.98 (exc VAT)
LilyPad Rainbow LED (strip of 7 colors)
This is the LilyPad Rainbow LED strip, a simple seven pack of every LilyPad LED that we have, each still attached to a PCB structure letting you take it apart at your leisure to be sewn into clothing or whatever else you can dream up. Note: The purple LED has a much higher voltage drop than other LilyPad LEDs so it will be dimmer than the others. What’s voltage drop? Click here and get your learn on! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Includes: 1x Red LilyPad LED 1x Blue LilyPad LED 1x Green LilyPad LED 1x..
R93.42 (exc VAT)
LilyPad Rainbow LED Panel (5 strips of 7 colors)
This is the LilyPad Rainbow LED Panel, a simple seven pack of every LilyPad LED that we have on five strips, each still attached to a PCB structure letting you take it apart at your leisure to be sewn into clothing or whatever else you can dream up. Note: The purple LED has a much higher voltage drop than other LilyPad LEDs so it will be dimmer than the others. What’s voltage drop? Click here and get your learn on! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. Includes: 5x Red LilyPad LED 5x Blue LilyPad LED 5x Green..
R389.91 (exc VAT)
LilyPad Simple Power
The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that’s it! We provide you with a JST connector and a slide switch. You can solder in your own surface mount (or through-hole) resistor in line with the output, or solder the jumper closed if you don’t require a resistor. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and ..
R78.07 (exc VAT)
LilyPad XBee
The LilyPad XBee is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! LilyPad XBee was co-developed by Kate Hartman and Rob Faludi. It works with all the popular XBee module types but do..
R260.09 (exc VAT)

Store Information