Shafts


Cable Carrier - 10x15mm (0.5m Length)
No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a “drag chain,” each carrier can be used in projects with a large number of moving parts to protect internally installed cables, pipes, or tubes so they can be bent and moved while remaining protected. Cable carriers can most commonly been found in 3D printers and CNC machines but they can be used in any situation where you need cables or tubes to bend without risk of them being damaged or wearing out prematurely. ..
R230.00
Shaft - D-Shaft (Stainless; 1/4"D x 1.00"L)
These 1.0" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 1.0” Diameter - 1/4” Flat Edge Width - 0.16" ..
R26.00
Shaft - D-Shaft (Stainless; 1/4"D x 1.25"L)
These 1.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 1.25” Diameter - 1/4” Flat Edge Width - 0.16" ..
R28.50
Shaft - D-Shaft (Stainless; 1/4"D x 1.375"L)
These 1.375" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 1.375” Diameter - 1/4” Flat Edge Width - 0.16" ..
R31.00
Shaft - D-Shaft (Stainless; 1/4"D x 1.50"L)
These 1.50" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 1.50” Diameter - 1/4” Flat Edge Width - 0.16" ..
R34.00
Shaft - D-Shaft (Stainless; 1/4"D x 1.75"L)
These 1.75" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 1.75” Diameter - 1/4” Flat Edge Width - 0.16" ..
R36.50
Shaft - D-Shaft (Stainless; 1/4"D x 10"L)
These 10" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 10” Diameter - 1/4” Flat Edge Width - 0.16" ..
R110.00
Shaft - D-Shaft (Stainless; 1/4"D x 12"L)
These 12" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 12” Diameter - 1/4” Flat Edge Width - 0.16" ..
R123.00
Shaft - D-Shaft (Stainless; 1/4"D x 2.00"L)
These 2" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 2” Diameter - 1/4” Flat Edge Width - 0.16" ..
R39.00
Shaft - D-Shaft (Stainless; 1/4"D x 2.25"L)
These 2.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 2.25” Diameter - 1/4” Flat Edge Width - 0.16" ..
R41.50
Shaft - D-Shaft (Stainless; 1/4"D x 2.375"L)
These 2.375" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 2.375” Diameter - 1/4” Flat Edge Width - 0.16" ..
R44.50
Shaft - D-Shaft (Stainless; 1/4"D x 2.50"L)
These 2.5" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 2.5” Diameter - 1/4” Flat Edge Width - 0.16" ..
R47.00
Shaft - D-Shaft (Stainless; 1/4"D x 3.00"L)
These 3" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 3” Diameter - 1/4” Flat Edge Width - 0.16" ..
R52.00
Shaft - D-Shaft (Stainless; 1/4"D x 4.00"L)
These 4" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 4” Diameter - 1/4” Flat Edge Width - 0.16" ..
R57.50
Shaft - D-Shaft (Stainless; 1/4"D x 5.00"L)
These 5" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 5” Diameter - 1/4” Flat Edge Width - 0.16" ..
R65.50
Shaft - D-Shaft (Stainless; 1/4"D x 6.00"L)
These 6" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 6” Diameter - 1/4” Flat Edge Width - 0.16" ..
R76.00
Shaft - D-Shaft (Stainless; 1/4"D x 7.00"L)
These 7" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 7” Diameter - 1/4” Flat Edge Width - 0.16" ..
R84.00
Shaft - D-Shaft (Stainless; 1/4"D x 8.00"L)
These 8" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 8” Diameter - 1/4” Flat Edge Width - 0.16" ..
R91.50
Shaft - D-Shaft (Stainless; 1/4"D x 9.00"L)
These 9" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when used with a gear, pulley, or even a shaft coupler. Dimensions: Length - 9” Diameter - 1/4” Flat Edge Width - 0.16" ..
R99.50
Shaft - Solid (Stainless; 1/2"D x 1"L)
These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 1” Diameter - 1/2” ..
R34.00
Shaft - Solid (Stainless; 1/2"D x 10"L)
These 10" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 10” Diameter - 1/2” ..
R199.50
Shaft - Solid (Stainless; 1/2"D x 12"L)
These 12" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 12” Diameter - 1/2” ..
R218.00
Shaft - Solid (Stainless; 1/2"D x 2"L)
These 2" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 2” Diameter - 1/2” ..
R52.00
Shaft - Solid (Stainless; 1/2"D x 3"L)
These 3" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 3” Diameter - 1/2” ..
R70.50
Shaft - Solid (Stainless; 1/2"D x 4"L)
These 4" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 4” Diameter - 1/2” ..
R89.00
Shaft - Solid (Stainless; 1/2"D x 5"L)
These 5" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 5” Diameter - 1/2” ..
R107.50
Shaft - Solid (Stainless; 1/2"D x 6"L)
These 6" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 6” Diameter - 1/2” ..
R126.00
Shaft - Solid (Stainless; 1/2"D x 7"L)
These 7" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 7” Diameter - 1/2” ..
R144.00
Shaft - Solid (Stainless; 1/2"D x 8"L)
These 8" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 8” Diameter - 1/2” ..
R162.50
Shaft - Solid (Stainless; 1/2"D x 9"L)
These 9" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 9” Diameter - 1/2” ..
R181.00
Shaft - Solid (Stainless; 1/4"D x 1"L)
These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 1” Diameter - 1/4” ..
R15.50
Shaft - Solid (Stainless; 1/4"D x 10"L)
These 10" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 10” Diameter - 1/4” ..
R86.50
Shaft - Solid (Stainless; 1/4"D x 2"L)
These 2" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 2” Diameter - 1/4” ..
R23.50
Shaft - Solid (Stainless; 1/4"D x 4"L)
These 4" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 4” Diameter - 1/4” ..
R39.00
Shaft - Solid (Stainless; 1/4"D x 5"L)
These 5" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 5” Diameter - 1/4” ..
R47.00
Shaft - Solid (Stainless; 1/4"D x 6"L)
These 6" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 6” Diameter - 1/4” ..
R55.00
Shaft - Solid (Stainless; 1/4"D x 7"L)
These 7" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 7” Diameter - 1/4” ..
R62.50
Shaft - Solid (Stainless; 1/4"D x 8"L)
These 8" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 8” Diameter - 1/4” ..
R70.50
Shaft - Solid (Stainless; 1/4"D x 9"L)
These 9" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 9” Diameter - 1/4” ..
R78.50
Shaft - Solid (Stainless; 1/8"D x 1"L)
These 1" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 1” Diameter - 1/8” ..
R10.00
Shaft - Solid (Stainless; 1/8"D x 10"L)
These 10" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 10” Diameter - 1/8” ..
R34.00
Shaft - Solid (Stainless; 1/8"D x 12"L)
These 12" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 12” Diameter - 1/8” ..
R36.50
Shaft - Solid (Stainless; 1/8"D x 2"L)
These 2" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 2” Diameter - 1/8” ..
R13.00
Shaft - Solid (Stainless; 1/8"D x 3"L)
These 3" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 3” Diameter - 1/8” ..
R15.50
Shaft - Solid (Stainless; 1/8"D x 4"L)
These 4" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 4” Diameter - 1/8” ..
R18.00
Shaft - Solid (Stainless; 1/8"D x 5"L)
These 5" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 5” Diameter - 1/8” ..
R20.50
Shaft - Solid (Stainless; 1/8"D x 6"L)
These 6" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 6” Diameter - 1/8” ..
R23.50
Shaft - Solid (Stainless; 1/8"D x 7"L)
These 7" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 7” Diameter - 1/8” ..
R26.00
Shaft - Solid (Stainless; 1/8"D x 8"L)
These 8" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 8” Diameter - 1/8” ..
R28.50
Shaft - Solid (Stainless; 1/8"D x 9"L)
These 9" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8 Note: For a drive-shaft, check out d-shafts instead. Dimensions: Length - 9” Diameter - 1/8” ..
R31.00

Store Information