Modules


GPS Module - Copernicus II (12 Channel)
Copernicus II is the latest iteration of the popular Copernicus GPS module from Trimble. The Trimble Copernicus II delivers proven performance and Trimble quality for a new generation of position-enabled products. It features the TrimCore™ navigation software for extremely fast startup times and high performance in foliage canopy and urban canyon environments. Also, the Copernicus II is compatible with all applications using the previous generation of Copernicus module. Not sure which GPS module is right for you? Check out our GPS Buying Guide! Replaces:GPS-07951 Features: Tiny size : 19x..
R1,126.50 (inc VAT)
GPS Module - Venus638FLPx-L 20Hz (14 Channel)
Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applications. It offers very low power consumption, high sensitivity, and best in class signal acquisition and time-to-first-fix performance. Venus638FLPx contains all the necessary components of a complete GPS module, includes 1.2dB cascaded system NF RF front-end, GPS baseband signal processor, 0.5ppm TCXO, 32.768kHz RTC crystal, RTC LDO regulator, and passive components. It requires very low external component count and takes up only 100mm2 PCB footprint. Not sure which GP..
R741.00 (inc VAT)
GPS Mouse - GP-808G (72 Channel)
The GPS Mouse is a combination GPS and Compass in a self contained module perfect for UAV and autonomous vehicle enthusiasts. The The GP-808G inside the Mouse is a highly sensitive GPS module that can accurately provide position, velocity, and time readings. This module is highly accurate and easy to use, requires almost no set-up time, and is very easy to embed into your projects! This 72-channel GPS receiver, that supports a standard NMEA-0183 and uBlox 8 protocol, has low power consumption of 40mA@3.3V-5.0V, GPS/QZSS/GLONASS support, and -167dBm tracking sensitivity. The GP-808G has been t..
R741.00 (inc VAT)
GPS Receiver - EM-506 (48 Channel)
The EM-506 GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable included. This EM-506 GPS module is powered by SiRF Star IV, it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. With SiRF CGEE (Client Generated Extended Ephemeris) technology, it predicts satellite positions for up to 3 days and delivers CGE..
R949.00 (inc VAT)
GPS Receiver - GP-20U7 (56 Channel)
The GP-20U7 is a compact GPS receiver with a built-in high performances all-in-one GPS chipset. The GP-20U7 accurately provides position, velocity, and time readings as well possessing high sensitivity and tracking capabilities. Thanks to the low power consumption this receiver requires, the GP-20U7 is ideal for portable applications such as tablet PCs, smart phones, and other devices requiring positioning capability. This 56-channel GPS module, that supports a standard NMEA-0183 and uBlox 7 protocol, has low power consumption of 40mA@3.3V (max), an antenna on board, and -162dBm tracking sens..
R385.50 (inc VAT)
GPS Receiver - GP-735 (56 Channel)
The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don’t have a lot of space to work in. Really it’s quite small. This 56-channel GPS module, based on the uBlox 7th generation chipset, has an operating voltage of 3.3~5.5V, an antenna on board, and connects to your system via TTL serial. The 1Hz update rate is fast enough for the majority of applications (and can be increased to 10Hz ..
R889.50 (inc VAT)
GPS Receiver - LS20031 5Hz (66 Channel)
The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution. The GPS smart antenna will track up to 66 satellites at a time while providing fast time-to-first-fix, one-second navigation update and low power consumption. It can provide you with superior sensitivity and performace even in urban canyon and dense..
R1,186.00 (inc VAT)
SparkFun GPS Logger Shield
The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a GP3906-TLP GPS Module – a 66-channel GPS receiver featuring a MediaTek MT3339 architecture and up to a 10Hz update rate. The GPS module will stream constant position updates over a simple TTL-level serial port, which you can then log to a µSD card and/or use for other purposes. Everything on the shield is highly configur..
R889.50 (inc VAT)
SparkFun GPS Module - Copernicus II DIP (12 Channel)
The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. Simply provide 2.7 - 3.3VDC. The Copernicus II DIP breakout has an impedance-matched, end-launch, standard SMA connector that will mate with our SMA GPS antennas listed below. This revision of the board fixes a few silkscreen errors and adds a jumper between the VCC and XSTBY pins. Not sure which GPS module is right for you? Check out our GPS Buying Guide! Get Started with the Copernicus II Guide 1..
R1,364.00 (inc VAT)
GPS Module - Copernicus II DIP (12 Channel) (Sale)
Description: The Copernicus II is a great new GPS receiver from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. Simply provide 2.7 - 3.3VDC. The Copernicus II DIP breakout has an impedance-matched, end-launch, standard SMA connector that will mate with our SMA GPS antennas listed below. This revision of the board does away with the pin-headers so that you can decide whether or not you want to solder pins to the board. Check out our GPS buying guide! Dimensions: 1.1 x 1.25" ..
R1,067.50 (inc VAT)
GPS Receiver - EM-406A SiRF III (20 Channel)
Replacement: GPS-12751. The new rev of the EM-406A is available! Instead of only 20 channels the new EM-506 has a total of 48 and plenty more features, go check it out! This page is for reference only. Description: The EM-406A GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable included. The EM406A module makes a great gift for that special someone who's i..
R949.00 (inc VAT)
GPS Receiver - EM-408 SiRF III (20 Channel)
Description: The EM-408 GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes a built-in patch antenna and an MMCX connector for an optional external antenna! 5-pin interface cable included. Please note the EM408 uses a 5-pin cable and is not compatible with the 6-pin cable included with the EM406. Not sure which GPS module is right for you? Check out our GPS buying guide! Features: 20-Channel Receiver Extremely high sensitivity : -159dBm 10m Positional..
R1,453.00 (inc VAT)
GPS Receiver - GP-2106 SiRF IV (48 Channel)
The GP-2106 is a small form factor GPS receiver with built-in antenna. Powered by the SiRF Star IV, the module can acquire satellites as low as -163dBm. It also has a hibernate mode which can go as low as 30uA while maintaining a hot start. Note: This module runs at 1.8V VCC, however, you can use 3.3V TTL on the TX and RX pins. Also, the ON/OFF pin needs to be toggled high (to 1.8V) or low in order to turn on the module. Note: This GPS Receiver does NOT include a connecting ribbon cable. This cable will need to be purchased separately. Features: SiRF IV chipset (3db gain over SiRF III) 48..
R1,008.00 (inc VAT)
GPS Receiver - GP-635T (50 Channel)
The GP-635T is a slim GPS receiver with -161dBm tracking sensitivity and only 27 second cold start time. The slim design makes it ideal for applications where you don’t have a lot of space to work in. Really it’s quite small. This 50-channel GPS module, based on the uBlox-6 chipset, has an operating voltage of 3.3~5.5V, an antenna on board, and connects to your system via TTL serial. The 1Hz update rate is fast enough for the majority of applications (and can be increased to 5Hz if you need) so whether you’re tracking a pet or building an autonomous car, the GP-635T has you covered! Not sure ..
R889.50 (inc VAT)
GPS Receiver - GS407 Helical (50 Channel)
Combine the u-Blox chipset with Sarantel’s powerful SL1206 helical antenna and you get the impressively sensitive GS407. Whether this receiver is in your pocket or under your car seat, you are likely to pickup a rock solid GPS signal. Not sure which GPS module is right for you? Check out our GPS buying guide! Note: The GS406 has been replaced with this GPS receiver. The specifications are almost all identical, but the GS407 makes use of a newer helical antenna, which makes the overall length a bit smaller. Features: u-Blox 6 chipset Sarantel omni-directional Geo-helix SL1206 active anten..
R1,868.00 (inc VAT)
GPS Receiver - Retail LS20031 5Hz (66 Channel)
Description: The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution. The GPS smart antenna will track up to 66 satellites at a time while providing fast time-to-first-fix, one-second navigation update and low power consumption. It can provide you with superior sensitivity and performace even in urba..
R1,186.00 (inc VAT)
GPS Receiver Module SMD - S1315F
The S1315F SMD IC is a small form factor 65-channel GPS module solution intended for a broad range of OEM products, where fast and easy system integration and minimal development risk is required. You only need to provide DC power of 3.0V to 3.6V and GPS signal; the S1315F will output navigation solution in standard NMEA-0183 protocol format. We found quite a few of these on our last Inventory Day, but we don’t actually use them on any of our boards. We have made them available at a drastically reduced price for anyone who could possibly use one of these handy little ICs. Note: Since this pr..
R326.00 (inc VAT)
SiGe GN3S Sampler v3
The GN3S Sampler v3 is a very interesting high-end research device. Co-developed by the GNSS Lab at the University of Colorado and SiGe, this USB device captures raw GPS data to a binary file on your computer. This device will not tell you a position solution outright like our other GPS modules. Instead, the GN3S Sampler is designed to directly capture the low-level signal data (raw intermediate frequency samples) being delivered by the GPS satellite network and processed by the SiGe radio front end. Version 3, the latest of the samplers, continues to utilizes the SiGe 4120 GPS ASIC. However..
R13,341.00 (inc VAT)
SparkFun GPS Shield Kit
This is the SparkFun GPS Shield Kit, a great launch pad for anyone looking to get into the world of GPS. This little kit includes our GPS Shield, an EM-506 GPS Receiver with interface cable, and a set of R3 headers to solder onto the shield. Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. Here’s where we are. GPS also gives you amazingly accurate time! A connector for the popular EM-506 GPS receiver is populated on the board, and..
R1,186.00 (inc VAT)

Store Information