Modules


SparkFun SIM Card Socket Breakout
This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Note: This breakout board was originally designed for a SIM socket with a switch for card detection. We have since switched to a socket that does not have this feature so the SW1 and SW2 pins have nothing to break out and can be considered NC. The 6 SIM card pins, however, are still broken out correctly. Documents: Schematic Eagle Files GitHub (Design Files) ..
R267.00 (inc VAT)
ADH8066 GSM Module
Description: The ADH8066 is a miniature, quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module, which can be integrated into a great number of wireless projects. You can use this module to accomplish almost anything a normal cell phone can - SMS text messages, GSM/GPRS, TCP/IP, and more! It also includes a SIM card socket on the back! Check the datasheet for a full list of features. We have the mating connector and the evaluation board for this module listed below. Documents: Datasheet AT Command Reference Manual Enhanced AT Command Reference Manual FTP A..
R1,008.00 (inc VAT)
GM862 SMD Connector
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you’re prototyping with the GM862, you pretty much have to have one of these. Documents: Datasheet ..
R44.50 (inc VAT)
SM5100B Mating Connector
This is a 60-pin, narrow pitch (0.5mm) connector which mates with the SM5100B cellular module.****We put this connector on our SM5100B Evaluation Board. Documents: Datasheet (Part number: AXK5F60545P) ..
R59.50 (inc VAT)
GSM/GPRS Module - SM5100B
The SM5100B is a miniature, quad-band GSM 850/EGSM 900/DCS 1800/PCS 1900 module, which can be integrated into a great number of wireless projects. You can use this module to accomplish almost anything a normal cell phone can - SMS text messages, GSM/GPRS, TCP/IP, and more! This module features two UARTS, an SPI interface, and two 10-bit ADCs. It also supports Li-ion battery charging, a 4x6 keypad, and an LCD interface. Inputs/outputs are available for a speaker and microphone. An antenna does come attached to the module. Power supplied to the module should be regulated between 3.3-4.2VDC (..
R888.00 (inc VAT)

Store Information