R143.00

Exc VAT: R124.35
quantity
Stock Availability
354 can ship in 9 working days
0 can ship in 24 hours

Pi Zero USB Stem

Stock code: KIT-14526

The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle. Once the Stem is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Raspberry Pi then acts as a USB device using its own Linux kernel gadget drivers to get started.

The Zero Stem is designed to be soldered directly to the USB SMD test pads on the bottom of the Raspberry Pi Zero, needing no wires or pogo pins at all, just solder and a soldering iron! Attaching the stem to your Pi also allows you to create a portable VNC server, or even cluster several Raspberry Pi Zeros with just a USB hub.

The Zero Stem is compatible with the Raspberry Pi Zero v1.3 and the Raspberry Pi Zero W v1.1, but unfortunately it is not compatible with the Raspberry Pi Zero v1.2 or any full-size Raspberry Pi due to their shapes and sizes.

Note: In order for your Pi Zero to function as a USB device with this Stem, you will need to configure it to act as one. You will be able to find these instructions in the Documentations tab under “How to OTG Fast”.

Includes:

  • 1x Pi Zero USB Stem
  • 1x USB Connector
  • 2x Nylon Bolt
  • 2x Nylon Screw

Documents:

Videos


Related Products

Full-Bridge Motor Driver Dual - L298N

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard..

R127.00 Exc VAT: R110.43

JTAG USB OCD Programmer/Debugger for ARM processors

This is the mother of all JTAG Programmers for ARMs - and it’s about 1/10th the price of other progr..

R1,873.00 Exc VAT: R1,628.70

LinkM - USB to I2C

LinkM is a USB adapter that addresses two of the most frequently-requested BlinkM features. It enabl..

R825.50 Exc VAT: R717.83

SparkFun USB Host Shield

This new version corrects the pin out for the GPX and RESET pins. The SparkFun USB Host Shield conta..

R476.00 Exc VAT: R413.91

SparkFun USB MicroB Plug Breakout

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port o..

R79.50 Exc VAT: R69.13

Solder - 1/4lb Spool (0.032") Special Blend

We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world...

R635.00 Exc VAT: R552.17

SPECIAL

Soldering Tip - Hakko - 3mm Bevel (T18-C3)

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a bevel type of sol..

R133.35 R190.50 Exc VAT: R115.96

USB to RS232 Converter - 6ft

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop is..

R397.00 Exc VAT: R345.22

USB Weatherproof Connector - Panel Mount (USB B)

There are times when you need to subject your electronics to some pretty intense environments. The m..

R436.50 Exc VAT: R379.57

SparkFun microB USB Breakout

This simple board breaks out a micro-B USB connector’s VCC, GND, ID, D- and D+ pins to a 0.1" pitch ..

R31.50 Exc VAT: R27.39

SparkFun USB Type A Female Breakout

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitc..

R76.00 Exc VAT: R66.09

SPECIAL

SparkFun MicroView - USB Programmer

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino ..

R199.85 R285.50 Exc VAT: R173.78

USB Cable Extension - 1.5 Foot

This is a 1.5' long USB extension cable equipped with type A male connector on one end to plug into ..

R47.50 Exc VAT: R41.30

SPECIAL

SparkFun Pi Wedge

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspb..

R166.60 R238.00 Exc VAT: R144.87

Pimoroni Explorer HAT Pro

The Pimoroni Explorer HAT Pro is a “shield” for the Raspberry Pi and provides you with the perfect p..

R539.50 Exc VAT: R469.13

Bare Conductive Pi Cap

This is the Bare Conductive Pi Cap, a small, shield-like device that adds precise capacitive touch, ..

R1,111.00 Exc VAT: R966.09

USB OTG Cable - Female A to Micro B - 5in

USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would no..

R63.50 Exc VAT: R55.22

Raspberry Pi Zero W

The credit-card-sized computer has become even smaller! The Raspberry Pi Zero W is still the Pi you ..

R317.50 Exc VAT: R276.09

SparkFun Pi Servo HAT

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightfor..

R254.00 Exc VAT: R220.87

SparkFun Qwiic HAT for Raspberry Pi

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwi..

R111.00 Exc VAT: R96.52

Night Light Soldering Kit

The night is dark and full of terrors, so why not light it up with this handy little night light tha..

R412.50 Exc VAT: R358.70

heART - Surface Mount Soldering Kit

Be still my beating heart! With the heART Surface Mount Soldering Kit you will be able to learn the ..

R444.50 Exc VAT: R386.52