R936.50

Exc VAT: R814.35
quantity
Stock Status
0 available immediately
4 available in 9 working days

LilyPad MP3

Stock code: DEV-11013

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can put on a micro-SD card.

It can be powered by a 3.7V Lipo battery (charging circuit built-in!), or an external 3.5-6V source. Off the shelf, it will play specific audio files when any of its five trigger inputs are grounded, or you can solder in an RGB rotary encoder (not included) and load new firmware (included in the link below) to add a user interface for track selection and volume control!

The board is compatible with sketches written for the MP3 Player Shield. Our example code uses Bill Porter's MP3 Player library, which makes writing new code very easy. All you need to do is add a microSD card and some speakers, and you're ready to rock.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.

Features:

  • ATmega 328p microprocessor with Arduino bootloader (Pro 3.3V/8MHz)
  • VS1053B MP3 (and many other formats) decoder chip
  • TPA2016D2 stereo amplifier
  • MCP73831 3.7V Lipo charger (preset to 500mA, rate can be changed if desired)
  • Headphone jack
  • Five trigger inputs, also usable as analog, serial and I2C ("Wire") connections
  • Load new firmware (or write your own) using the free Arduino IDE
  • 5V FTDI basic breakout for battery recharging and reprogramming
  • Header for optional RGB rotary encoder (not included, requires soldering)

Documents:

Videos


Related Products

LilyPad FTDI Basic Breakout - 5V

This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a pu..

R351.00 (inc VAT)

Needle Set

This set of sewing needles is a must-have when stitching together your next e-textile project. Each ..

R31.00 (inc VAT)

Clear Plastic Knob

This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a sh..

R15.50 (inc VAT)

Conductive Thread Bobbin - 30ft (Stainless Steel)

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. ..

R74.50 (inc VAT)

LilyTwinkle ProtoSnap

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wire..

R390.00 (inc VAT)

microSD USB Reader

This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the US..

R109.00 (inc VAT)

E-Textiles Battery - 110mAh (2C Discharge)

This is a very small, extremely lightweight battery based on Polymer Lithium Ion chemistry. This is ..

R140.50 (inc VAT)

WAV Trigger

The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supp..

R1,139.50 (inc VAT)

Tsunami Super WAV Trigger

The Tsunami Super WAV Trigger is the next evolutionary step beyond the original WAV Trigger. Based ..

R2,029.00 (inc VAT)

Hamburger Mini Speaker

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for..

R93.50 (inc VAT)

LilyPad E-Sewing ProtoSnap Kit

The LilyPad E-Sewing ProtoSnap Kit is a great way to incorporate buttons and switches into an e-text..

R312.00 (inc VAT)

LilyPad E-Sewing ProtoSnap

The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e..

R132.50 (inc VAT)

SparkFun Noisy Cricket Stereo Amplifier - 1.5W

You won't need a series four de-atomizer with our rendition of the Noisy Cricket, just wire it up an..

R265.50 (inc VAT)

LilyPad Light Sensor

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and read..

R78.00 (inc VAT)

Lilypad USB Plus

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U..

R655.50 (inc VAT)

microSD Card with Adapter - 32GB (Class 10)

This is a class 10 32GB microSD memory card, perfect for housing operating systems for single board ..

R624.50 (inc VAT)

microSD Card with Adapter - 64GB (Class 10)

This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board ..

R780.50 (inc VAT)

SparkFun I2S Audio Breakout - MAX98357A

The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which co..

R109.00 (inc VAT)

SparkFun Qwiic MP3 Trigger

Sometimes you just need an MP3 to play. Whether it's a theme song as you enter the room or a power s..

R468.00 (inc VAT)