R343.50

Exc VAT: R298.70
quantity
Stock Status
0 available immediately
118 available in 13 working days

Pro Micro - 3.3V/8MHz

Stock code: DEV-12587

Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.

This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

This is the 3.3V version so, as always, keep in mind the limits of system voltage and so forth. The lower system voltage also has its advantages, though, like ease of use with many common 3.3V sensors. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!

Note: See the GitHub link below for support with the Arduino IDE.

Features:

  • ATMega 32U4 running at 3.3V/8MHz
  • Supported under Arduino IDE v1.0.1
  • On-Board micro-USB connector for programming
  • 9 x 10-bit ADC pins
  • 12 x Digital I/Os (5 are PWM capable)
  • Rx and Tx Hardware Serial Connections
  • Our Smallest Arduino-Compatible Board Yet!
  • 1.3x0.7"

Documents:


Related Products

Arduino Uno - R3

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now u..

R686.50 (inc VAT)

SparkFun Cerberus USB Cable - 6ft

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what i..

R165.50 (inc VAT)

SparkFun USB MicroB Plug Breakout

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port o..

R93.50 (inc VAT)

USB micro-B Cable - 6 Foot

USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB conne..

R78.00 (inc VAT)

Arduino Pro 328 - 3.3V/8MHz

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is..

R335.50 (inc VAT)

Arduino Pro 328 - 5V/16MHz

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is..

R335.50 (inc VAT)

Arduino Leonardo with Headers

Arduino is an open-source physical computing platform based on a simple i/o board and a development ..

R655.50 (inc VAT)

Fio v3 - ATmega32U4

The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small ..

R811.50 (inc VAT)

Tiny AVR Programmer

The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in..

R388.00 (inc VAT)

SparkFun AST-CAN485 Dev Board

The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini...

R1,092.50 (inc VAT)

SparkFun microB USB Breakout

This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch ..

R54.50 (inc VAT)

Pro Micro - 5V/16MHz

Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of ..

R343.50 (inc VAT)

LilyPad Arduino USB - ATmega32U4 Board

This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It h..

R562.00 (inc VAT)

USB Micro-B Cable - 6"

This is a USB 2.0 type A to Micro-B 5-pin black cable. You know, the mini-B connector that usually c..

R47.00 (inc VAT)

Teensy LC

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R359.00 (inc VAT)

Qduino Mini - Arduino Dev Board

The Qduino Mini is a tiny, Arduino-compatible board with a battery connector and charger built-in as..

R686.50 (inc VAT)

30% off

SparkFun Thermocouple Breakout - MAX31855K

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial i..

R240.45 (inc VAT)

30% off

SparkFun SAMD21 Mini Breakout

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun S..

R338.80 (inc VAT)

SparkFun LED Driver Breakout - LP55231

The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying t..

R179.50 (inc VAT)

Teensy 3.6

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R811.50 (inc VAT)

SparkFun RedBoard Edge

The SparkFun RedBoard Edge is a nifty little rework of the SparkFun RedBoard designed to be panel mo..

R468.00 (inc VAT)

SparkFun Traveler microB Cable - 1m

Are you a traveler? Do you remove ever ounce of extra weight from your gear? The SparkFun 1 meter Tr..

R62.50 (inc VAT)

Atto84 with Arduino Bootloader

Arduino and Arduino compatible dev boards are an awesome tool for developing an idea quickly but, be..

R185.50 (inc VAT)

TinyFPGA AX2 Board

The TinyFPGA AX2 board is a bare-bones breakout board for the XO2-1200 field-programmable gate array..

R562.00 (inc VAT)

TinyFPGA BX Board

The TinyFPGA BX is a small field-programmable gate array (FPGA) board with all of the components and..

R1,186.00 (inc VAT)

Arduino MKR Vidor 4000

Looking for a board for a very specific use that Arduino doesn’t make? Or maybe you want a more comp..

R2,339.50 (inc VAT)

Arduino Uno WiFi R2

Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC6..

R1,401.50 (inc VAT)

SparkFun Pro nRF52840 Mini - Bluetooth Development Board

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF528..

R780.50 (inc VAT)