| quantity |
| Stock Status | |
| 0 available immediately | |
| 196 available in 11 working days |
Stock code: DEV-12049
This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB support. Any of our LiPo batteries can be plugged right into the JST socket to provide you with easy, on-the-go power. That LiPo battery is even rechargeable through the board, no more special external LiPo chargers required!
Just like the LilyPad Simple, this board operates at 3.3V and features a JST socket so you can directly connect a Li-Po battery for power and an on-board power switch so you can turn it off when you're not feeling particularly blinky. The LilyPad Arduino USB was designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.
Features:
Documents:
This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 MEMS accelerometer f..
R436.50 (inc VAT)
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB conne..
R102.50 (inc VAT)
This set of sewing needles is a must-have when stitching together your next e-textile project. Each ..
R38.50 (inc VAT)
This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. ..
R95.00 (inc VAT)
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project wit..
R129.50 (inc VAT)
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indic..
R210.00 (inc VAT)
The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even th..
R129.50 (inc VAT)
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wire..
R493.00 (inc VAT)
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of ..
R421.50 (inc VAT)
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of ..
R421.50 (inc VAT)
This is a very small, extremely lightweight battery based on Polymer Lithium Ion chemistry. This is ..
R169.50 (inc VAT)
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-te..
R113.50 (inc VAT)
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic..
R132.50 (inc VAT)
The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore ci..
R1,108.50 (inc VAT)
The LilyPad ProtoSnap Plus Kit is an all-in-one e-textile prototyping kit that has been specifically..
R1,496.00 (inc VAT)
The LilyPad E-Sewing ProtoSnap Kit is a great way to incorporate buttons and switches into an e-text..
R369.50 (inc VAT)
The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e..
R165.00 (inc VAT)
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and read..
R113.50 (inc VAT)
This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U..
R807.50 (inc VAT)
