R213.50

Exc VAT: R185.65
quantity
Stock Status
0 available immediately
177 available in 10 working days

EasyDriver - Stepper Motor Driver

Stock code: ROB-12779

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.

This EasyDriver V4.5 has been co-designed with Brian Schmalz. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development.

Features:

  • A3967 Microstepping Driver
  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage
  • Adjustable current control from 150mA/phase to 700mA/phase
  • Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds

Documents:


Related Products

Female Headers

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" ..

R21.50 (inc VAT)

30% off

Break Away Headers - Straight

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or gener..

R9.80 (inc VAT)

Arduino Uno - R3 SMD

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now u..

R626.00 (inc VAT)

Arduino Uno - R3

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now u..

R626.00 (inc VAT)

Stepper Motor with Cable

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar M..

R383.50 (inc VAT)

SparkFun Monster Moto Shield

This is essentially a ramped up version of our Ardumoto motor driver shield. For this SparkFun Monst..

R1,429.50 (inc VAT)

Small Stepper Motor

These small steppers are a great way to get things moving, especially when positioning and repeatabi..

R184.50 (inc VAT)

Stepper Motor - 68 oz.in (400 steps/rev)

These steppers are a great way to get things moving, especially when positioning and repeatability i..

R397.00 (inc VAT)

Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)

These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the moto..

R994.00 (inc VAT)

Small Heatsink

These tiny little black anodized heatsinks are perfect for cooling off small surface-mount component..

R45.50 (inc VAT)

Jumper Wires Premium 6" M/M - 20 AWG (10 Pack)

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on..

R114.00 (inc VAT)

SparkFun RedBot Mainboard

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The..

R711.00 (inc VAT)

Big Easy Driver

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper..

R326.50 (inc VAT)

Stepper Motor - 125 oz.in (200 steps/rev, 600mm Wire)

Stepper motors are great motors for position control. They can be found in desktop printers, plotter..

R880.50 (inc VAT)

SparkFun AutoDriver - Stepper Motor Driver (v13)

The SparkFun AutoDriver board is based on the STMicro L6470 dSPIN stepper motor driver. This powerfu..

R782.50 (inc VAT)

SparkFun Stepoko

The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and i..

R3,129.00 (inc VAT)

SparkFun Serial Controlled Motor Driver

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to driv..

R298.50 (inc VAT)

MOTORplate

The MOTORplate from Pi-Plates brings a suite of professional motion control features to your Raspber..

R853.50 (inc VAT)

SparkFun Ardumoto - Motor Driver Shield

The Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun..

R441.00 (inc VAT)

SparkFun Wireless Motor Driver Shield

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other c..

R426.50 (inc VAT)

SparkFun Motor Driver - Dual TB6612FNG (with Headers)

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak)..

R114.00 (inc VAT)

SparkFun Motor Driver - Dual TB6612FNG (1A)

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak)..

R99.50 (inc VAT)

SparkFun Haptic Motor Driver - DRV2605L

Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver...

R149.50 (inc VAT)