R512.00

Exc VAT: R445.22
quantity
Stock Status
0 available immediately
1160 available in 12 working days

Teensy 3.2

Stock code: DEV-13736

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C *or *you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 250mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! The Teensy 3.2 adds a more powerful 3.3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3V add-on boards that require a little more power. Additionally, if it is used within the Teensy 3.1 limits of operation, the Teensy 3.2 and 3.1 are interchangeable!

Note: This does not come with a USB cable, please check below for an appropriate one.

Features:

  • 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
  • 256K Flash Memory, 64K RAM, 2K EEPROM
  • 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
  • 34 Digital I/O Pins (5V tolerance on Digital Inputs)
  • 12 PWM outputs
  • 7 Timers for intervals/delays, separate from PWM
  • USB with dedicated DMA memory transfers
  • 3 UARTs (serial ports)
  • SPI, I2C, I2S,CAN Bus, IR modulator
  • I2S (for high quality audio interface)
  • Real Time Clock (with user-added 32.768 crystal and battery)
  • 16 DMA channels (separate from USB)
  • Touch Sensor Inputs
  • 1.4 x 0.7" (~35 x 18 mm)

Related Products

30% off

Voltage Regulator - 3.3V

This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed outpu..

R9.80 (inc VAT)

30% off

SparkFun Cerberus USB Cable - 6ft

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what i..

R105.70 (inc VAT)

Arduino Pro Mini 328 - 5V/16MHz

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This..

R199.00 (inc VAT)

Arduino Fio

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design ..

R533.50 (inc VAT)

USB micro-B Cable - 6 Foot

USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB conne..

R71.00 (inc VAT)

30% off

Arduino Pro Mini 328 - 3.3V/8MHz

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This..

R139.30 (inc VAT)

Fio v3 - ATmega32U4

The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small ..

R739.50 (inc VAT)

Teensy++ 2.0

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R668.50 (inc VAT)

SparkFun AST-CAN485 Dev Board

The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini...

R995.50 (inc VAT)

Teensy Audio Board

This is the Teensy Audio board add-on for the Teensy 3.x line development boards. This audio board p..

R398.50 (inc VAT)

SparkFun ESP8266 Thing

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading ..

R362.50 (inc VAT)

Teensy Arduino Shield Adapter

The Teensy is an amazing and compact development platform in a breadboard friendly form factor, but ..

R234.50 (inc VAT)

Teensy LC

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R327.00 (inc VAT)

Teensy 3.1 XBee Adapter

The Teensy is an amazing development platform that allows you to get more computing power than an Ar..

R156.50 (inc VAT)

WiFi Module - ESP8266

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give ..

R142.00 (inc VAT)

30% off

SparkFun SAMD21 Mini Breakout

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun S..

R308.70 (inc VAT)

Teensy Header Kit

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of hea..

R28.50 (inc VAT)

Teensy Prop Shield

The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld pr..

R540.50 (inc VAT)

Teensy Prop Shield LC

This low-cost (LC) Teensy Prop Shield is meant for making light and sound effects on small, handheld..

R233.50 (inc VAT)

Teensy 3.5

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R597.50 (inc VAT)

Teensy 3.6

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R739.50 (inc VAT)

SparkFun TeensyView

The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy de..

R306.00 (inc VAT)

Teensy 3.5 (Headers)

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R711.00 (inc VAT)

Teensy 3.6 (Headers)

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy pack..

R839.00 (inc VAT)

MicroPython pyboard v1.1

The pyboard is a compact and powerful electronics development board that runs MicroPython. It connec..

R995.50 (inc VAT)

MicroPython pyboard v1.1 (with Headers)

The pyboard is a compact and powerful electronics development board that runs MicroPython. It connec..

R1,138.00 (inc VAT)

Flexible Grayscale Display - 1.81"

We’re clearing out the black SparkX version of this board so pick one up while they’re cheap! Other ..

R853.50 (inc VAT)

SparkFun BlackBoard

The BlackBoard from SparkFun is everything you need in an Arduino Uno with many extra perks. BlackBo..

R425.50 (inc VAT)

30% off

SparkFun Traveler microB Cable - 1m

Are you a traveler? Do you remove ever ounce of extra weight from your gear? The SparkFun 1 meter Tr..

R39.90 (inc VAT)

SparkFun Rugged microB Cable - 1m

Is your laptop covered in stickers that hide the dents? Do you put your equipment through its paces?..

R57.00 (inc VAT)

Qwiic IR Array - MLX90640 110° FOV

The MLX90640 contains a 32x24 array of thermopile sensors creating, in essence, a low resolution the..

R1,705.50 (inc VAT)

Qwiic IR Array - MLX90640 55° FOV

The MLX90640 contains a 32x24 array of thermopile sensors creating, in essence, a low resolution the..

R1,421.00 (inc VAT)

TinyFPGA AX2 Board

The TinyFPGA AX2 board is a bare-bones breakout board for the XO2-1200 field-programmable gate array..

R512.00 (inc VAT)

TinyFPGA BX Board

The TinyFPGA BX is a small field-programmable gate array (FPGA) board with all of the components and..

R1,081.00 (inc VAT)

Euroshield 1 – Eurorack Audio Development Board

Euroshield enables synthesizer hobbyists and professionals to add a distinctive element to Eurorack...

R2,559.00 (inc VAT)

SparkFun Pro nRF52840 Mini - Bluetooth Development Board

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF528..

R711.00 (inc VAT)

SmartLED Shield V4 for Teensy

LED matrices are getting more powerful with each passing year requiring you to need a more powerful ..

R539.00 (inc VAT)

SparkFun BlackBoard C

The BlackBoard from SparkFun is everything you need in an Arduino Uno with many extra perks. BlackBo..

R425.50 (inc VAT)