R125.00

Exc VAT: R108.70
quantity
Stock Status
0 available immediately
727 available in 9 working days

SparkFun Motor Driver - Dual TB6612FNG (with Headers)

Stock code: ROB-14450

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Due to popular demand, this version of the SparkFun Motor Driver includes pre-soldered male headers for ease of use. With the headers already soldered on, you can jump right in to using this little board without any assembly!

Logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

The board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Note: If you are looking for the SparkFun Motor Driver without headers, it can be found here or in the Similar Products below.

Features:

  • Power supply voltage: VM = 15V max, VCC = 2.7--5.5V
  • Output current: Iout = 1.2A (average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short-brake/stop motor control modes
  • Built-in thermal shutdown circuit and low-voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins
  • Filtering capacitors on both supply lines
  • Pre-soldered headers

Documents:


Related Products

Female Headers

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" ..

R23.50 (inc VAT)

Motor Driver 15A IRF7862PBF

The Pololu 15 Amp high-power motor driver is a discrete MOSFET H-bridge designed to drive one DC bru..

R1,061.00 (inc VAT)

30% off

Arduino Pro Mini 328 - 5V/16MHz

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This..

R152.95 (inc VAT)

Breadboard - Self-Adhesive (White)

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 ro..

R93.50 (inc VAT)

SparkFun RedBot Mainboard

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The..

R780.50 (inc VAT)

Actobotics Kit - ActoBitty 2

This is the ActoBitty 2 from Actobotics, an easy to assemble starter robotics kit that is perfect fo..

R935.00 (inc VAT)

EasyDriver - Stepper Motor Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a d..

R234.00 (inc VAT)

tinyESC v2 - Brushed Speed Controller

This is the tinyESC v2 from FingerTech Robotics, an ultra small bi-directional brushed motor control..

R936.50 (inc VAT)

SparkFun Snappable Protoboard

Sometimes it's nice to have a protoboard that's super long and skinny, super small, or just a bunch ..

R171.50 (inc VAT)

SparkFun Ardumoto - Motor Driver Shield

The Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun..

R484.00 (inc VAT)

SparkFun Wireless Motor Driver Shield

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other c..

R468.00 (inc VAT)

SparkFun Motor Driver - Dual TB6612FNG (1A)

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak)..

R109.00 (inc VAT)

SparkFun Haptic Motor Driver - DRV2605L

Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver...

R164.00 (inc VAT)