R217.00

Exc VAT: R188.70
quantity
Stock Status
0 available immediately
92 available in 10 working days

Pressure Sensor (Qwiic) - MS5637

Stock code: SPX-14688

MEMs based barometric pressure sensors are quite common these days. The Qwiic Pressure Sensor with the MS5637 shines by being the most sensitive barometric pressure sensor we have come across. It is capable of detecting the difference in 13cm of air! And the MS5637 is low cost and easy to use to boot.

The Qwiic Pressure Sensor for the MS5637 is a very sensitive, fully calibrated, low power, easy to use barometric pressure sensor. It's perfect for home weather stations, detecting changes in altitude, and pneumatic based switches or actuators.

The original manufacturer, TE, has written a great Arduino library for the device. We've added a heap of examples and new functions to make the sensor even easier to use. Search the Arduino Library manager for 'SparkFun MS5637' to get the latest library features.

This board is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!

The MS5637 Pressure Sensor can also be automatically detected, scanned, configured, and logged using the OpenLog Artemis datalogger system. No programming, soldering, or setup required!

We do not plan to regularly produce SparkX products so get them while they’re hot!

NOTE: The I2C address of the MS5637 is 0x76 and is hardware defined. A multiplexer/Mux is required to communicate to multiple MS5637 sensors on a single bus. If you need to use more than one MS5637 sensor consider using the Qwiic Mux Breakout.

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

Features:

  • Measures pressure from 300mbar to 1200mbar
  • Measures temperature from -40°C to 125°C
  • Fully factory calibrated
  • Fast response time
  • Very low power consumption
  • Simple I2C communication

Documents:

  • MS5637 Datasheet
  • Example Arduino Sketches: For example sketches please search the Arduino library manager for 'SparkFun MS5637' to quickly get many helpful example sketches
  • Eagle Files
  • Schematic
  • Library Repo
  • Please visit the repo for the latest firmware, library and hardware designs.

Related Products

SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that pr..

R281.00 (inc VAT)

SparkFun Pressure Sensor Breakout - MS5803-14BA

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C..

R1,123.50 (inc VAT)

SparkFun Weather Shield

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pr..

R780.50 (inc VAT)

SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic)

The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality s..

R882.00 (inc VAT)

Qwiic Cable - Breadboard Jumper (4-pin)

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one en..

R31.00 (inc VAT)

Qwiic Cable - 50mm

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabl..

R23.50 (inc VAT)

Qwiic Cable - 100mm

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enab..

R39.00 (inc VAT)

Qwiic Cable - 200mm

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enab..

R39.00 (inc VAT)

SparkFun Qwiic Shield for Arduino

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the..

R156.00 (inc VAT)

SparkFun GPS Breakout - XA1110 (Qwiic)

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to ou..

R1,186.00 (inc VAT)

SparkFun Qwiic HAT for Raspberry Pi

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwi..

R132.50 (inc VAT)