R18.00

Exc VAT: R15.65
quantity
Out of stock
0 can ship in 10 working days
0 can ship in 24 hours

Hall-Effect Sensor - AH1815 (Non-Latching)

Stock code: SEN-14709

The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A Hall-Effect sensor is much smaller, but can handle less current than a reed switch.

The AH1815 is a low-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer equipment for home appliance and industrial applications such as smart-meter magnetic-tamper detection. Based on two sensitive Hall effect plates and a chopper-stabilized architecture, the AH1815 provides a reliable solution over the whole operating range. To support portable and battery powered equipment, the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24µW with a supply of 3V.

The single open drain output can switch on with either a north or south pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than operating point (Bop) the output is switched on (pulled low). The output is turned off when B becomes lower than the releasing point (Brp). The output will remain off when there is no magnetic field.

Features:

  • Omnipolar (North or South pole) Operation
  • Low Sensitivity
  • Single Open Drain Output
  • Micropower Operation
  • 2.5V to 5.5V Operating Range
  • -40°C to +125°C Operating Temperature
  • Chopper Stabilized Design Provides Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Stress

Documents:


Related Products

Reed Switch

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two..

R29.50 Exc VAT: R25.65

Magnet Square - 0.25"

These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB), these ma..

R29.50 Exc VAT: R25.65

Magnet Square - 0.125"

These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB), th..

R15.00 Exc VAT: R13.04

Magnet Disk - 0.709"

This is your standard fridge magnet, perfect for holding up quite a bit of weight. Grade C8, ceramic..

R15.00 Exc VAT: R13.04

Magnet Ring - 3/16"

These are small rare earth magnets - 3/16" rings. Composed of Neodymium/Iron/Boron (NdFeB), these ma..

R15.00 Exc VAT: R13.04

SPECIAL

Hall-Effect Sensor - US1881 (Latching)

The US1881 is an integrated Hall-Effect latched sensor. That’s nice but what does it do? Holding a m..

R13.50 R18.00 Exc VAT: R11.74

JST Jumper 3 Wire Assembly

This is a simple three wire cable. Great for jumping from board to board or just about anything else..

R29.50 Exc VAT: R25.65

Reed Switch - Insulated

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two..

R37.00 Exc VAT: R32.17

SparkFun Essential Sensor Kit

Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of ba..

R711.00 Exc VAT: R618.26

SPECIAL

Magnetic Door Switch Set

This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert yo..

R44.62 R59.50 Exc VAT: R38.80

LilyPad Reed Switch

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-te..

R53.50 Exc VAT: R46.52

SparkFun Sensor Kit

Do you have a good understanding of various sensors or need a variety of them for a project? This ki..

R2,193.00 Exc VAT: R1,906.96