R1,616.00

Exc VAT: R1,405.22
quantity
Stock Availability
40 can ship in 9 working days
0 can ship in 24 hours

CO? Humidity and Temperature Sensor - SCD30

Stock code: SPX-14751

The SCD30 from Sensirion is a high quality NDIR based CO? sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude.

We’ve written an Arduino library to make reading the CO?, humidity, and temperature very easy. It can be downloaded through the Arduino Library manager: search for ‘SparkFun SCD30’ or it can be downloaded here. We recommend using a Qwiic Breadboard Cable to connect the SCD30 to a Qwiic compatible board. The YeLLow wire goes in the SCL pin. The SCD30 also supports a serial interface but we haven’t worked with it.

The CO? sensor works very well and for additional accuracy the SCD30 accepts ambient pressure readings. We recommend using the SCD30 in conjunction with the Qwiic Pressure Sensor - MS5637 or the Qwiic Environmental Sensor - BME680 to obtain the current barometric pressure.

Note: The SCD30 has an automatic self-calibration routine. Sensirion recommends 7 days of continuous readings with at least 1 hour a day of ‘fresh air’ for self-calibration to complete.

We do not plan to regularly stock all SparkX products so get them while they’re hot!

Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

Features:

  • Power supply voltage: 3.3V - 5.5V
  • NDIR CO2 sensor technology
  • Integrated temperature and humidity sensor
  • Best performance-to-price ratio
  • Dual-channel detection for superior stability
  • Small form factor: 35 mm x 23 mm x 7 mm
  • Measurement range: 400 ppm – 10.000 ppm
  • Accuracy: ±(30 ppm + 3%)
  • Current consumption: 19 mA @ 1 meas. per 2 s.
  • Energy consumption: 120 mJ @ 1 measurement
  • Fully calibrated and linearized
  • Digital interface UART or I2C

Documents:


Related Products

SparkFun Serial Basic Breakout - CH340G

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC fr..

R109.50 Exc VAT: R95.22

SparkFun Air Quality Breakout - CCS811

The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a wide range of Total V..

R411.00 Exc VAT: R357.39

SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic)

The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality s..

R767.50 Exc VAT: R667.39

Qwiic Cable - Breadboard Jumper (4-pin)

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one en..

R27.50 Exc VAT: R23.91

SparkFun Qwiic HAT for Raspberry Pi

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwi..

R96.00 Exc VAT: R83.48

SparkFun Qwiic Shield for Photon

The SparkFun Qwiic Shield for Photon is an easy-to-assemble board that provides a simple way to inco..

R96.00 Exc VAT: R83.48

Environmental Sensor (Qwiic) - BME680

The BME680 from Bosch is a powerful sensor capable of sensing humidity, barometric pressure, tempera..

R547.00 Exc VAT: R475.65

SparkFun Micro OLED Breakout (Qwiic)

The SparkFun Qwiic Micro OLED Breakout is a Qwiic-enabled version of our popular Micro OLED display!..

R274.00 Exc VAT: R238.26

SparkFun BlackBoard

The BlackBoard from SparkFun is everything you need in an Arduino Uno with many extra perks. BlackBo..

R410.00 Exc VAT: R356.52