R476.00

Exc VAT: R413.91
quantity
Out of stock
0 can ship in 12 working days
0 can ship in 24 hours

FTDI to USB C Cable - 3.3V

Stock code: CAB-14909

USB C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This FTDI cable is a USB C to Serial converter which allows for a simple way to connect TTL interface devices to USB. Each 26AWG cable is one meter in length with the USB C side protected by a 2in enclosure.

The FTDI cable is designed around an RS232, which is housed in a USB C connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS (Green), RX (Yellow), TX (Orange), VCC 3.3V (Red), CTS (Brown), GND (Black). This FTDI to USB C Cable is also capable of handling high voltages up to 300V max.

There are pros and cons to the FTDI Cable vs the FTDI Basic. The FTDI Basic has great LED indicators, but requires a Mini-B cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.

Documents:


Related Products

FTDI Cable 5V VCC-3.3V I/O

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL..

R333.50 Exc VAT: R290.00

FTDI Cable 5V

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL..

R333.50 Exc VAT: R290.00

SparkFun FTDI Basic Breakout - 3.3V

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which ma..

R317.50 Exc VAT: R276.09

Arduino Pro 328 - 3.3V/8MHz

It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is..

R285.50 Exc VAT: R248.26

Arduino Pro Mini 328 - 3.3V/8MHz

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This..

R206.50 Exc VAT: R179.57

USB to RS232 Converter - 6ft

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop is..

R397.00 Exc VAT: R345.22

USB to TTL Serial Cable

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to ..

R254.00 Exc VAT: R220.87

LilyPad Arduino 328 Main Board

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily in..

R305.00 Exc VAT: R265.22

SparkFun Beefy 3 - FTDI Basic Breakout

This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of thi..

R317.50 Exc VAT: R276.09

SparkFun FT231X Breakout

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake ..

R222.00 Exc VAT: R193.04

SparkFun Serial Basic Breakout - CH340G

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC fr..

R127.00 Exc VAT: R110.43

USB 3.1 Cable A to C - 3 Foot

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this..

R111.00 Exc VAT: R96.52

SparkFun 16x2 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R508.00 Exc VAT: R441.74

SparkFun 16x2 SerLCD - RGB on Black 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R508.00 Exc VAT: R441.74

SparkFun 20x4 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R635.00 Exc VAT: R552.17

TinyFPGA Programmer

If you have yourself a TinyFPGA A-series board (including the AX2 found on our site) then you are de..

R285.50 Exc VAT: R248.26