R13,654.50

Exc VAT: R11,873.48
quantity
Stock Status
0 available immediately
36 available in 11 working days

bladeRF 2.0 micro xA4

Stock code: WRL-15043

The bladeRF 2.0 micro xA4 is the next generation Software Defined Radio (SDR) that has been packed into a small form factor and was designed for high performance as well as mobile applications. This model of the bladeRF offers a frequency range of 47MHz to 6GHz, 61.44MHz sampling rate, and 2×2 MIMO streaming. Students and RF enthusiasts will find the bladeRF 2.0 micro xA4 an esy to use option to explore wireless communications, hile still providing a powerful waveform development platform expected by industry professionals.

The bladeRF 2.0 micro xA4 has been fitted with a USB 3.0 Superspeed connector and a Cypress FX3 microcontroller providing you with a high speed, low latency board with a powerful ARM9 processor and enough bandwidth to saturate the full duplex 5Gbps USB 3.0 link. An Altera Cyclone V FPGA provides the interface between the FX3 and RF transceiver for the bladeRF. This FPGA has single-cycle access embedded memory, hard 18x18 multipliers for dedicated DSP and many general logic elements ready to be programmed. All four of the RF SMA ports are capable of providing power over bias-tee circuitry to wideband amplifiers and pre-amps. The last major feature that the micro possesses is the AD9361 wideband RF transceiver from Analog devices. This transceiver is made for next generation wireless protocols, capable of handling anything from simple FM audio to the latest 5G LTE standard to whatever the future may hold.

The bladeRF 2.0 micro features support for Linux, macOS, and Windows in addition to GNU Radio via gr-osmosdr, Pothos via SoapySDR, SDRange, SDR Console, SDR# via sdrsharp-bladeRF, YateBTS, OpenAirInterface, srsUE and srsLTE, MathWorks MATLAB® & Simulink® via libbladeRF bindings.

Includes:

  • 1x bladeRF 2.0 micro xA4
  • 1x USB 3.0 SS Cable

Features:

  • Analog Devices RF Transceiver
    • 47 MHz to 6 GHz frequency range
    • 2x2 MIMO, 61.44 MHz sampling rate
    • 56 MHz filtered bandwidth (IBW)
    • Automatic gain control (AGC)
    • Real-time custom gain control tables controlled via SPI and discrete external input pins
    • Automatic IQ and DC offset correction
    • 128-tap digital FIR filtering
  • Altera Cyclone V FPGA
    • 49 kLE and 301 kLE variants available for custom signal processing and hardware accelerators
  • Factory-calibrated SiTime MEMS VCTCXO
    • Calibrated within 1 Hz of 38.4 MHz
    • Taming supported via 12-bit DAC or ADF4002 PLL
    • MEMS oscillators provide superior reliability, aging, power supply noise rejection, and vibe/shock performance compared to quartz oscillators
  • USB 3.0 SuperSpeed Support
    • Cypress FX3 peripheral controller with integrated 200 MHz ARM926EJ-S processor
    • Fully bus-powered over USB 3.0
    • External power option via 5V DC barrel jack with automatic switchover

Documents:

Videos


Related Products

30% off

Quad-band Cellular Duck Antenna SMA

This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellula..

R59.85 (inc VAT)

Quad-band Wired Cellular Antenna SMA

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellu..

R227.50 (inc VAT)

Interface Cable MMCX to SMA

SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM8..

R99.50 (inc VAT)

SMA Connector

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that re..

R28.50 (inc VAT)

Quad-band Cellular Antenna SMA

This high gain, 7.75" antenna is perfect for AVL applications where cellular reception is a must. Co..

R142.00 (inc VAT)

Interface Cable SMA to U.FL

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Document..

R71.00 (inc VAT)

RPSMA Male to SMA Female Adapter

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any ..

R42.50 (inc VAT)

SMA Male to RPSMA Male Adapter

This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or inter..

R42.50 (inc VAT)

Ubertooth One

The Ubertooth One is an open source 2.4 GHz device suitable for Bluetooth experimentation. Based on ..

R2,816.50 (inc VAT)

Mojo v3 FPGA Development Board

Mojo (n) is defined as "the art or practice of casting magic spells." With the Mojo v3 FPGA you will..

R2,132.00 (inc VAT)

Interface Cable - SMA Female to SMA Male (25cm)

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long..

R85.50 (inc VAT)

HackRF One

This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or recepti..

R7,168.50 (inc VAT)

Telescopic Antenna SMA - 75 MHz to 1 GHz (ANT500)

This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length ..

R711.00 (inc VAT)

RockBLOCK Mk2 - Iridium SatComm Module

The RockBLOCK Mk2 allows you to send and receive short messages from anywhere on Earth with a clear ..

R7,110.50 (inc VAT)

Telescopic Antenna SMA - 300 MHz to 1.1 GHz (ANT700)

This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total leng..

R569.00 (inc VAT)

bladeRF x40

The bladeRF x40 is an affordable USB 3.0 Software-Defined Radio (SDR) designed to allow students and..

R11,948.00 (inc VAT)

RockBLOCK 9603 - Iridium SatComm Module

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear..

R7,110.50 (inc VAT)

YARD Stick One - USB Wireless Transceiver

The YARD Stick One (Yet Another Radio Dongle) is a palm-sized, low-speed USB wireless transceiver (s..

R2,816.50 (inc VAT)

TinyFPGA AX2 Board

The TinyFPGA AX2 board is a bare-bones breakout board for the XO2-1200 field-programmable gate array..

R512.00 (inc VAT)

TinyFPGA BX Board

The TinyFPGA BX is a small field-programmable gate array (FPGA) board with all of the components and..

R1,081.00 (inc VAT)

Arduino MKR Vidor 4000

Looking for a board for a very specific use that Arduino doesn’t make? Or maybe you want a more comp..

R2,132.00 (inc VAT)

LimeSDR

The LimeSDR is a low cost, open source, apps-enabled software defined radio (SDR) platform that can ..

R9,928.00 (inc VAT)

LimeSDR Mini

The LimeSDR Mini development board is a hardware platform for developing and prototyping high-perfor..

R5,376.50 (inc VAT)

bladeRF 2.0 micro Enclosure

This is a simple, transparent enclosure designed to protect your bladeRF 2.0 micro from external thr..

R569.00 (inc VAT)