R185.00

Exc VAT: R160.87
quantity
Stock Status
0 available immediately
150 available in 12 working days

SparkFun Serial Basic Breakout - CH340C and USB-C

Stock code: DEV-15096

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340C and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the previous USB generation at 1.5A and and also solves the universally frustrating dilemma of plugging a USB cable in correctly, because it’s reversible! The Serial Basic works with 5V and 3.3V systems and possesses the capability to auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340C IC to quickly and easily convert serial signals to USB.

The pinout of the Serial Basic mimics the common DTR/RXI/TXO/VCC/CTS/GND pinout found on hundreds of FTDI-to-USB derivatives. It can also be used as a general serial device for debugging (such as with a GPS module). There is a jumper on the rear of the board that controls the output voltage on the VCC pin. By default, the board outputs 3.3V and has 3.3V signals. Changing this jumper to 5V will cause the board to output 5V on the VCC pin with 5V signals.

Documents:


Related Products

Arduino Pro Mini 328 - 5V/16MHz

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This..

R199.00 (inc VAT)

SparkFun FTDI Basic Breakout - 5V

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which ma..

R256.00 (inc VAT)

SparkFun FTDI Basic Breakout - 3.3V

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which ma..

R306.00 (inc VAT)

LilyPad FTDI Basic Breakout - 5V

This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a pu..

R320.00 (inc VAT)

Arduino Pro 328 - 5V/16MHz

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is..

R306.00 (inc VAT)

Arduino Pro Mini 328 - 3.3V/8MHz

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This..

R199.00 (inc VAT)

SparkFun Logomatic v2 - Serial SD Datalogger (FAT32)

The SparkFun Logomatic v2 takes everything we learned with logging analog or serial data from your p..

R1,159.00 (inc VAT)

SparkFun USB to Serial Breakout - FT232RL

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to se..

R313.00 (inc VAT)

SparkFun Beefy 3 - FTDI Basic Breakout

This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of thi..

R313.00 (inc VAT)

SparkFun Serial Controlled Motor Driver

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to driv..

R298.50 (inc VAT)

SparkFun nRF52832 Breakout

The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half mi..

R341.50 (inc VAT)

SparkFun USB UART Serial Breakout - CY7C65213

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all av..

R277.50 (inc VAT)

SparkFun Serial Basic Breakout - CH340G

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC fr..

R157.00 (inc VAT)

USB 3.1 Cable A to C - 3 Foot

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this..

R99.50 (inc VAT)

SparkFun 16x2 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R455.00 (inc VAT)

SparkFun 16x2 SerLCD - RGB on Black 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R455.00 (inc VAT)

SparkFun 20x4 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R569.00 (inc VAT)

SuzyQable - ChromeOS Debug Cable

The SuzyQable allows developers, hobbyists, and others to quickly access debugging, recovery, and de..

R284.50 (inc VAT)

TinyFPGA Programmer

If you have yourself a TinyFPGA A-series board (including the AX2 found on our site) then you are de..

R256.00 (inc VAT)

FTDI to USB-C Cable - 3.3V

USB C is quickly becoming more and more prominent in the maker community because, let's be honest, w..

R426.50 (inc VAT)

USB 2.0 Cable A to C - 3 Foot

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this..

R64.00 (inc VAT)

SparkFun USB-C Breakout

With this USB breakout you will finally be able to incorporate a USB-C connector into your projects ..

R99.50 (inc VAT)

USB Female Type C Connector

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, w..

R64.00 (inc VAT)