R995.50

Exc VAT: R865.65
quantity
Stock Status
0 available immediately
178 available in 12 working days

Particle Argon IoT Development Kit

Stock code: KIT-15071

The Particle Argon is an IoT development kit that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and an ESP32 you have all the power of an ARM Cortex M4 with OpenThread mesh networking, Wi-Fi (b/g/n), NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone Wi-Fi endpoint or a Wi-Fi enabled gateway for a Particle Mesh network.

This IoT development kit from Particle includes an Argon development board, breadboard with an adhesive backing, 2.4GHz flex antenna, and USB cable. The starter project includes two resistors of 220?, one red LED, and one photodiode.

The Argon is also configured in the popular Feather footprint making it also compatible with Feather Shields! This includes a JST connector for a LiPo battery as well as charging of the battery over USB. Particle also provides an RGB status LED and a JTAG (SWD) connector for debugging and an onboard PCB antenna for your mesh network (you will need a U.FL antenna for NFC or Wi-Fi)

The Argon comes with access to the Device Cloud (10 free micro networks available) as well as three free months of device Cloud access using a cellular gateway. The Particle Could has some great features for building connected projects, including over-the-air firmware updates, and easy-to-use REST API, and firmware development supported by web and local IDEs.

Includes:

  • Argon Development Board
  • Breadboard
  • 2.4GHz Flex Antenna
  • USB Cable
  • 2x 220 Ohm Resistor
  • 1x Red LED
  • 1x Photodiode

Features:

  • Espressif ESP32-D0WD 2.4GHz Wi-Fi coprocessor
    • On-board 4MB flash for eSP32
    • 802.11 b/g/n support
    • 802.11 n (2.4GHz), up to 150Mbps
  • Nordic Semiconductor nRF52840 SoC
    • ARM Cortex-M4F 32-bit processor @ 64MHz
    • 1MB flash, 256KB RAM
    • IEEE 802.15.4 - 2006: 250Kbps
    • Bluetooth 5: 2Mbps, 1Mbps, 500Kbps, 125Kbps
    • Supports DSP insturctions, HW accelerated Floating Point Unit (FPU) calculations
    • ARM TrustZone CryptoCell-310 Cryptographic and security module
    • Up to +8 dBm TX power (down to -20dBm in 4dB steps)
    • NFC-A tag
  • On-board additional 4MB SPI flash
  • 20 mixed signal GPIO (6x Analog, 8x PWM), UART, I2C, SPI
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • On-board PCB antenna for mesh network
  • u.FL connectors for external antennas for mesh network, Wi-Fi, and NFC
  • FCC, CE, and IC certified. RoHS compliant

Documents:

Videos


Related Products

Breadboard - Classic

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much fru..

R170.50 (inc VAT)

2.4GHz Duck Antenna RP-SMA

2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with o..

R121.00 (inc VAT)

2.4GHz Duck Antenna RP-SMA - Large

Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for pr..

R142.00 (inc VAT)

Interface Cable RP-SMA to U.FL

This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard ..

R71.00 (inc VAT)

Interface Cable SMA to U.FL

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Document..

R71.00 (inc VAT)

2.4GHz Antenna - Adhesive (U.FL Connector)

This adhesive, omni-directional antenna is perfect for situations when you're trying to get a signal..

R114.00 (inc VAT)

Breadboard - Giant

Description: This is one giant solderless breadboard! It has 7 power buses, 40 columns, and 63 rows ..

R426.50 (inc VAT)

Breadboard - Full-Size (Bare)

Description: This is your tried and true full size solderless breadboard! It has 2 split power buses..

R99.50 (inc VAT)

60% off

SparkFun Inventor's Kit for Photon

The SparkFun Inventor's Kit for Photon is a great way to get started in the fresh IoT world and WiFi..

R1,024.20 (inc VAT)

SparkFun Photon RedBoard

The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the A..

R810.50 (inc VAT)

Particle Photon (No Headers)

Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you ..

R540.50 (inc VAT)

Particle Photon (Headers)

Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you ..

R540.50 (inc VAT)

SparkFun ESP32 Thing

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-..

R434.00 (inc VAT)

Particle Electron 3G Cellular Kit (Americas/Aus)

The Electron is a tiny development kit for creating 3G cellular-connected electronics projects and p..

R1,990.00 (inc VAT)

Particle Electron 3G Cellular Kit (Eur/Asia/Afr)

The Electron is a tiny development kit for creating 3G cellular-connected electronics projects and p..

R1,990.00 (inc VAT)

SparkFun LoRa Gateway - 1-Channel (ESP32)

The SparkFun 1-Channel LoRa Gateway is a powerful 3-network capable device thanks to an onboard ESP3..

R711.00 (inc VAT)

SparkFun Pro nRF52840 Mini - Bluetooth Development Board

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF528..

R711.00 (inc VAT)

Particle Argon IoT Development Board

The Particle Argon is an IoT development board that allows you to connect your mesh network to Wi-Fi..

R711.00 (inc VAT)

Particle Boron LTE IoT Development Board

The Particle Boron is a LTE CAT-M1/NB1 enabled development board that allows you to connect your mes..

R1,421.00 (inc VAT)

Particle Boron LTE IoT Development Kit

The Particle Boron is a LTE CAT-M1/NB1 enabled development board that allows you to connect your mes..

R1,705.50 (inc VAT)

Particle Xenon IoT Development Kit

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you ha..

R711.00 (inc VAT)