R569.00

Exc VAT: R494.78
quantity
Stock Status
0 available immediately
91 available in 11 working days

Serial Enabled 16x2 LCD - White on Black 5V

Stock code: LCD-09395

This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.

Features:

  • Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off via firmware
  • User definable splash screen* PCB: 103x36mm
  • LCD: 71.4x26.4mm

Documents:


Related Products

SparkFun RS232 Shifter - SMD

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose ..

R313.00 (inc VAT)

Infrared Sensor Jumper Wire - 3-Pin JST

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully..

R21.50 (inc VAT)

mbed - LPC1768 (Cortex-M3)

The mbed microcontroller is an ARM processor, a comprehensive set of peripherals and a USB programmi..

R1,394.00 (inc VAT)

Serial Enabled 20x4 LCD - Black on Green 5V

This is the latest evolution of our serial LCD. Included on a single board is a 20x4 LCD and an embe..

R512.00 (inc VAT)

30% off

JST Right Angle Connector - Through-Hole 3-Pin

This is a 3-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like t..

R11.90 (inc VAT)

CAN-BUS Shield

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hac..

R533.50 (inc VAT)

SparkFun Flexible Grayscale OLED Breakout - 1.81"

It's typically better to have a flexible mind and outlook on life, so the same should go for OLED di..

R1,109.50 (inc VAT)

SparkFun 16x2 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R455.00 (inc VAT)

SparkFun 16x2 SerLCD - RGB on Black 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R455.00 (inc VAT)

SparkFun 20x4 SerLCD - Black on RGB 3.3V

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective so..

R569.00 (inc VAT)

7.5 inch ePaper Bare Display

You may be familiar with ePaper or eInk displays from eReaders like the Kindle. This display is the ..

R2,274.50 (inc VAT)

4.2 inch ePaper Bare Display

You may be familiar with ePaper or eInk displays from eReaders like the Kindle. This display is the ..

R1,136.50 (inc VAT)

1.54 inch ePaper Bare Display

You may be familiar with ePaper or eInk displays from eReaders like the Kindle. This display is the ..

R368.50 (inc VAT)